Skip to content

1 HP Surface Aerator 240V Float Bottom Screen Vertical Bars No Control Panel

by ProLake
$1,812.00

Notify me when back in stock

4400AF 1 HP Surface Aerator 240V Float Bottom Screen Vertical Bars No Control Panel

Introduce more oxygen faster with the 4400AF 1 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The 4400AF 1 HP Surface Aerator can operate in as little as 19 inches of water. It is ideal for ponds/tanks with surface areas of about 1 acre.

The 4400AF 1 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the 4400AF 1 HP Surface Aerator is easily installed and maintained by a single person.

The 1 HP 4400 Surface Aerator circulates a large amount of water to keep your pond clear of muck and pesky insects. This aerator will keep a low profile because it doesn’t create a tall spray like a fountain. has designed this surface aerator to be effective, energy efficient, and low maintenance. One person can install this unit.

The 4400AF 1 HP Surface Aerator is available in 120 Volt (60 Hz). All units come with a float, three 50 ft. mooring lines and a bottom screen. An optional control panel is also available.

 

Common Applications:
  • Commercial aquaculture
  • Residential ponds and lakes
  • Retention ponds
  • Leachate ponds
  • Industrial lagoons
  • Waste water lagoons
  • Marina entrance and navigation
Key Features
  • The 4400AF 1 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The 4400AF 1 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The 4400AF 1 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The Kasco 4400AF 1 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The Kasco 4400AF 1 HP Surface Aerator only requires a 19? operating depth.

LEAVE A MESSAGE

4400AF 1 HP Surface Aerator 240V Float Bottom Screen Vertical Bars No Control Panel

Introduce more oxygen faster with the 4400AF 1 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The 4400AF 1 HP Surface Aerator can operate in as little as 19 inches of water. It is ideal for ponds/tanks with surface areas of about 1 acre.

The 4400AF 1 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the 4400AF 1 HP Surface Aerator is easily installed and maintained by a single person.

The 1 HP 4400 Surface Aerator circulates a large amount of water to keep your pond clear of muck and pesky insects. This aerator will keep a low profile because it doesn’t create a tall spray like a fountain. has designed this surface aerator to be effective, energy efficient, and low maintenance. One person can install this unit.

The 4400AF 1 HP Surface Aerator is available in 120 Volt (60 Hz). All units come with a float, three 50 ft. mooring lines and a bottom screen. An optional control panel is also available.

 

Common Applications:
  • Commercial aquaculture
  • Residential ponds and lakes
  • Retention ponds
  • Leachate ponds
  • Industrial lagoons
  • Waste water lagoons
  • Marina entrance and navigation
Key Features
  • The 4400AF 1 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The 4400AF 1 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The 4400AF 1 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The Kasco 4400AF 1 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The Kasco 4400AF 1 HP Surface Aerator only requires a 19? operating depth.

LEAVE A MESSAGE