2.3A 2 HP Surface Aerator 240V 3 Phase CA-3235 Control Panel

High performance surface aerators dramatically push high volumes of water into the air. This process increases the overall health of your water and keeps it thoroughly mixed. This introduction of oxygen and water movement breaks up stratification, eliminates odor, discourages algae growth and promotes a healthy aquatic environment. These self-contained units deliver up to 3 lbs of O2 per HP per hour of operation, making surface aerators the most dependable and efficient units on the mark

The 2 HP Surface Pond Aerator kit comes with a motor unit, a power cord, and a special float. The cable is 50’ long and has been approved to work underwater, while a single piece float is made of UV resistant high-density thermoplastic, therefore it’s all completely safe. It’s a standard kit, but it can be extended with a bottom screen or a control panel.

It was specifically designed to operate in small and shallow waters. It’s normally used for backyard ponds, municipal wastewater ponds, industrial plants, commercial aquaculture, and industrial plants. It’s the perfect alternative for anyone who needs to aerate their reservoir but does not wish for a fountain.

All aerators are lightweight and self-contained, they float at the surface with only a single power cord. There’s no electricity in the water because of it, so it poses no danger.

2 HP Surface Pond Aerators are among the most efficient devices destined for oxidizing ponds. They will help your water and the air to stay clean and healthy providing the best environment for fish and plants, and a place for people to gather around.

How Aerators Work

Aerators mix your water thoroughly by pushing high volumes of water into the air. This churning process helps increase your water's overall health by delivering 3lbs of O2 per horsepower each hour of operation.

Application Uses

Anywhere you need excellent oxygen transfer without the need of a fountain display for a relatively shallow pond

• Water treatment
• Fish farming
• Industrial aeration
• Aquaculture
• Residential and commercial golf aeration
• Industrial aeration

Features

• Efficient design ensures low power consumption and low total cost of ownership
• Built with long lasting internal components
• Salt water compatible stainless steel components allow reliable performance in harsh environments
• Easily maintain by cleaning motor housing when dirty and replacing anode when visibly corroded

The Benefits

• Good for your average-sized pond
• Best aeration efficiency (more oxygen placed in the water quickly)
• High oxygen transfer
• Produces 3lbs of oxygen roughly per HP per hour of operation
• Easily transported
• Installation only requires one person

Key Features

• The 2.3A 2 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
• Low maintenance and dependable design.
• The 2.3A 2 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
• The 2.3A 2 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
• An easily replaced protective sacrificial zinc anode is included with each unit.
• Safety Tested: ETL listed to UL and CSA Standards.
• The 2.3A 2 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
• The 2.3A 2 HP Surface Aerator only requires a 20? operating depth.
• Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50?, 100?, 150?, 200?, 250?, 300? or 400?.
• Made in the U.S.A.