Skip to content

ProLake 2HP Surface Aerator 240V 1PH No Float No Control Panel

by ProLake
$2,211.00

Notify me when back in stock

8400A 2HP Surface Aerator 240V 1PH No Float No Control Panel

High performance surface aerators dramatically push high volumes of water into the air. This process increases the overall health of your water and keeps it thoroughly mixed. This introduction of oxygen and water movement breaks up stratification, eliminates odor, discourages algae growth and promotes a healthy aquatic environment. These self-contained units deliver up to 3 lbs of O2 per HP per hour of operation, making surface aerators the most dependable and efficient units on the mark

The 2 HP Surface Pond Aerator kit comes with a motor unit, a power cord, and a special float. The cable is 50’ long and has been approved to work underwater, while a single piece float is made of UV resistant high-density thermoplastic, therefore it’s all completely safe. It’s a standard kit, but it can be extended with a bottom screen or a control panel.

It was specifically designed to operate in small and shallow waters. It’s normally used for backyard ponds, municipal wastewater ponds, industrial plants, commercial aquaculture, and industrial plants. It’s the perfect alternative for anyone who needs to aerate their reservoir but does not wish for a fountain.

All aerators are lightweight and self-contained, they float at the surface with only a single power cord. There’s no electricity in the water because of it, so it poses no danger.

2 HP Surface Pond Aerators are among the most efficient devices destined for oxidizing ponds. They will help your water and the air to stay clean and healthy providing the best environment for fish and plants, and a place for people to gather around.

How Aerators Work

Aerators mix your water thoroughly by pushing high volumes of water into the air. This churning process helps increase your water's overall health by delivering 3lbs of O2 per horsepower each hour of operation.

Application Uses

Anywhere you need excellent oxygen transfer without the need of a fountain display for a relatively shallow pond

  • Water treatment
  • Fish farming
  • Industrial aeration
  • Aquaculture
  • Residential and commercial golf aeration
  • Industrial aeration
The Benefits
  • Good for your average-sized pond
  • Best aeration efficiency (more oxygen placed in the water quickly)
  • High oxygen transfer
  • Produces 3lbs of oxygen roughly per HP per hour of operation
  • Easily transported
  • Installation only requires one person


LEAVE A MESSAGE

8400A 2HP Surface Aerator 240V 1PH No Float No Control Panel

High performance surface aerators dramatically push high volumes of water into the air. This process increases the overall health of your water and keeps it thoroughly mixed. This introduction of oxygen and water movement breaks up stratification, eliminates odor, discourages algae growth and promotes a healthy aquatic environment. These self-contained units deliver up to 3 lbs of O2 per HP per hour of operation, making surface aerators the most dependable and efficient units on the mark

The 2 HP Surface Pond Aerator kit comes with a motor unit, a power cord, and a special float. The cable is 50’ long and has been approved to work underwater, while a single piece float is made of UV resistant high-density thermoplastic, therefore it’s all completely safe. It’s a standard kit, but it can be extended with a bottom screen or a control panel.

It was specifically designed to operate in small and shallow waters. It’s normally used for backyard ponds, municipal wastewater ponds, industrial plants, commercial aquaculture, and industrial plants. It’s the perfect alternative for anyone who needs to aerate their reservoir but does not wish for a fountain.

All aerators are lightweight and self-contained, they float at the surface with only a single power cord. There’s no electricity in the water because of it, so it poses no danger.

2 HP Surface Pond Aerators are among the most efficient devices destined for oxidizing ponds. They will help your water and the air to stay clean and healthy providing the best environment for fish and plants, and a place for people to gather around.

How Aerators Work

Aerators mix your water thoroughly by pushing high volumes of water into the air. This churning process helps increase your water's overall health by delivering 3lbs of O2 per horsepower each hour of operation.

Application Uses

Anywhere you need excellent oxygen transfer without the need of a fountain display for a relatively shallow pond

  • Water treatment
  • Fish farming
  • Industrial aeration
  • Aquaculture
  • Residential and commercial golf aeration
  • Industrial aeration
The Benefits
  • Good for your average-sized pond
  • Best aeration efficiency (more oxygen placed in the water quickly)
  • High oxygen transfer
  • Produces 3lbs of oxygen roughly per HP per hour of operation
  • Easily transported
  • Installation only requires one person


LEAVE A MESSAGE