Font`N-Aire Platinum 2HP 3 Phase Floating Fountains
The distinctive center discharge pump design inherent in the CENTRIFUGAL PUMP DISPLAY FOUNTAIN ensures the precise vertical alignment of both the submersible motor's shaft and the discharge. Consequently, this design feature concentrates the entire weight of the fountain at the center of the float. This not only simplifies the processes of installing and removing the fountain from the float but also obviates the necessity for specialized mounting brackets or hardware.
Furthermore, our centrifugal pump design excels in generating high pressure, enabling the creation of impressive heights and displays. Notably, this exceptional performance is achieved with markedly lower horsepower requirements compared to alternative fountain equipment. It is imperative to underscore that the primary purpose of this fountain is purely aesthetic. This distinction is underscored by the fact that the volume of water propelled into the air is not significant enough to categorize it as an aerating device. This determination is grounded in rigorous oxygen transfer testing and a steadfast commitment to Air-O-Lator's stringent standards.
Details
FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam.
POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor.
ELECTRICAL SERVICE CABLE ASSEMBLY – Consisting of a standard 100’ length of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which conveniently plugs into the fountain.
CONTROLS – These controls feature a 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. Additionally, all of these components come prewired and mounted on a 16” x 14” plate. It is noteworthy that Air-O-Lator exclusively employs the Franklin Electric 600M submersible motor for all fountain lines. This water-cooled and lubricated motor is purposefully designed for lake and pond fountain applications, ensuring environmental safety.
Features
No seals or bearings to maintain.
High-speed, foul-resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water.
One-piece square flotation for stability to minimize any oscillation that can occur with round floats.
Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments.
ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only).
Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system.
3-year Limited Warranty 
