Skip to content
Learning Center About Us Contact Us
ProLake 3.1AF 3HP Surface Aerator 240V 1PH Float No Control Panel

ProLake 3.1AF 3HP Surface Aerator 240V 1PH Float No Control Panel

by ProLake
$4,238.00

Notify me when back in stock

Kasco 3.1AF 3HP Surface Aerator 240V 1PH Float No Control Panel

Introduce more oxygen faster with the Kasco 3.1AF 3 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The Kasco 3.1AF 3 HP Surface Aerator can operate in as little as 24 inches of water. It is ideal for ponds/tanks with surface areas of about 3 acres.

The Kasco 3.1AF 3 HP Surface Aerator comes with a lightweight, 2-blade weedless prop, designed to maximize the unit’s water moving performance and cut through even the toughest aquatic vegetation, all without increasing amp draw.

The Kasco 3.1AF 3 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the Kasco 3.1AF 3 HP Surface Aerator is easily installed and maintained by a single person.

The Kasco 3.1AF 3 HP Surface Aerator is available with an extremely efficient 240 Volt Single-Phase, 60 Hz. motor. All units come with a float and three 50 ft. mooring lines. An optional bottom screen and control panel are also available.

Product Features
  • The Kasco 3.1AF 3 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The Kasco 3.1AF 3 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The Kasco 3.1AF 3 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The Kasco 3.1AF 3 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The Kasco 3.1AF 3 HP Surface Aerator only requires a 24? operating depth.
  • Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50?, 100?, 150?, 200?, 250?,
  • 300? or 400?.
  • Made in the U.S.A.

    • LEAVE A MESSAGE

    Kasco 3.1AF 3HP Surface Aerator 240V 1PH Float No Control Panel

    Introduce more oxygen faster with the Kasco 3.1AF 3 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The Kasco 3.1AF 3 HP Surface Aerator can operate in as little as 24 inches of water. It is ideal for ponds/tanks with surface areas of about 3 acres.

    The Kasco 3.1AF 3 HP Surface Aerator comes with a lightweight, 2-blade weedless prop, designed to maximize the unit’s water moving performance and cut through even the toughest aquatic vegetation, all without increasing amp draw.

    The Kasco 3.1AF 3 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the Kasco 3.1AF 3 HP Surface Aerator is easily installed and maintained by a single person.

    The Kasco 3.1AF 3 HP Surface Aerator is available with an extremely efficient 240 Volt Single-Phase, 60 Hz. motor. All units come with a float and three 50 ft. mooring lines. An optional bottom screen and control panel are also available.

    Product Features
  • The Kasco 3.1AF 3 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The Kasco 3.1AF 3 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The Kasco 3.1AF 3 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The Kasco 3.1AF 3 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The Kasco 3.1AF 3 HP Surface Aerator only requires a 24? operating depth.
  • Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50?, 100?, 150?, 200?, 250?,
  • 300? or 400?.
  • Made in the U.S.A.

    • LEAVE A MESSAGE