3.1A 3HP Surface Aerator 240V 1PH No Float No Control Panel 

Introduce more oxygen faster with the 3.1A 3 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The 3.1A 3 HP Surface Aerator can operate in as little as 24 inches of water. It is ideal for ponds/tanks with surface areas of about 3 acres.

The Kasco 3.1A 3 HP Surface Aerator comes with a lightweight, 2-blade weedless prop, designed to maximize the unit’s water moving performance and cut through even the toughest aquatic vegetation, all without increasing amp draw.

High performance surface aerators dramatically push high volumes of water into the air. This process increases the overall health of your water and keeps it thoroughly mixed. This introduction of oxygen and water movement breaks up stratification, eliminates odor, discourages algae growth and promotes a healthy aquatic environment. These self-contained units deliver up to 3 lbs of O2 per HP per hour of operation, making surface aerators the most dependable and efficient units on the mark

The 3.1A 3 HP Surface Aerator does not include a float or bottom screen. For floating units please select from the list below.

Product Features

• High-efficiency design means low power compensation and low operating costs
• Heavy-duty motor and corrosion resistant design; suitable for salt-water or other corrosive environments
• Safety Tested: ETL listed to UL and CSA Standards, 50Hz models CE marked
• An easily replaced protective sacrificial zinc anode included with each unit
• Low maintenance and dependable design
• Multiple cord lengths available (see charts below); all SJTOW underwater rated (50 Hz models are available only with 10M or stub power cords)
• Proven performance for continuous, supplemental or emergency use
• 1/2, 3/4 and 1HP sizes can easily by moved and installed by 1 person
• Power cord lengths available up to 500 ft.
• Power cords can be protected with a flex sleeve cord protector