Skip to content

5HP Surface Aerator 240V Float Bottom Screen Vertical Bars with Control Panel

by ProLake
$9,214.00

Notify me when back in stock

5.3AF 5HP 240V Float Bottom Screen Vertical Bars CA-3235 Control Panel

Introduce more oxygen faster with the 5.3AF 5 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The 5.3AF 5 HP Surface Aerator can operate in as little as 26 inches of water. It is ideal for ponds/tanks with surface areas of about 5 acres.

The 5.3AF 5 HP Surface Aerator comes with a lightweight, 2-blade weedless prop, designed to maximize the unit’s water moving performance and cut through even the toughest aquatic vegetation, all without increasing amp draw.

The 5.3AF 5 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the 5.3AF 5 HP Surface Aerator is easily installed and maintained by a single person.

The 5.3AF 5 HP Surface Aerator is available with an extremely efficient 208/240 Volt 3-Phase, 60 Hz. motor. All units come with a float, three 50 ft. mooring lines and a bottom screen. An optional control panel is also available.

Optional bottom screens and/or control panels are also available.

Product Features
  • The 5.3AF 5 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The 5.3AF 5 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The 5.3AF 5 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The 5.3AF 5 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The 5.3AF 5 HP Surface Aerator only requires a 26? operating depth.
  • Choice of Cord Lengths: SJTOW underwater rated power cord length options of 100?, 150?, 200?, 250?, 300? or 400?.
  • Made in the U.S.A.

LEAVE A MESSAGE

5.3AF 5HP 240V Float Bottom Screen Vertical Bars CA-3235 Control Panel

Introduce more oxygen faster with the 5.3AF 5 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The 5.3AF 5 HP Surface Aerator can operate in as little as 26 inches of water. It is ideal for ponds/tanks with surface areas of about 5 acres.

The 5.3AF 5 HP Surface Aerator comes with a lightweight, 2-blade weedless prop, designed to maximize the unit’s water moving performance and cut through even the toughest aquatic vegetation, all without increasing amp draw.

The 5.3AF 5 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the 5.3AF 5 HP Surface Aerator is easily installed and maintained by a single person.

The 5.3AF 5 HP Surface Aerator is available with an extremely efficient 208/240 Volt 3-Phase, 60 Hz. motor. All units come with a float, three 50 ft. mooring lines and a bottom screen. An optional control panel is also available.

Optional bottom screens and/or control panels are also available.

Product Features
  • The 5.3AF 5 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The 5.3AF 5 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The 5.3AF 5 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The 5.3AF 5 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The 5.3AF 5 HP Surface Aerator only requires a 26? operating depth.
  • Choice of Cord Lengths: SJTOW underwater rated power cord length options of 100?, 150?, 200?, 250?, 300? or 400?.
  • Made in the U.S.A.

LEAVE A MESSAGE