Decorative Fountain 2.3JF 2 HP 8 Solar Panels with Controller 

Capitalize on the unbeatable strength of Kasco products driven by the sun. This technology is easy to use and more powerful than anything on the market and is designed for use in applications spanning from farm ponds to harsh industrial environments. These patented controllers come solar + grid blender options. They are an all-in-one inverter and Variable Frequency Drive with maximum power point tracking designed to utilize the most solar power available.

Solar only systems use solar energy to maximize operation during daylight hours. In partial sunlight (morning and afternoon), the system will run at reduced speed extending the daily run time.

These packages includes

• PicoCell™ 3500 Control Panel.
• Blender Controller Option
• These systems utilize solar power during the day and grid power at night to provide 24/7 performance. These packages include the PicoBlender™ 2500 Control Panel.

(morning and afternoon), the system will run at reduced speed extending the daily run time.

Product Features

• Operate standard Kasco 50hz / 60hz, 1/2-2HP units (2HP units must be 3 phase)
• Soft start function to maximize runtime and extended available solar hours
• Status LEDs to indicate operating status and fault conditions
• Easily add additional solar panels to increase performance and extend daily run time from solar
• GFCI motor protection
• Comes with 8 solar panels

Complete Package Includes

• PicoPanel Controller - Grid Blended (PicoBlender) or Direct Drive (PicoCell)
• Solar Panel Racking - Includes poles and crossbeams
• Solar Panels
• Solar Panel Jumper Cables
• Kasco Aerator/Fountain/Circulator
• All Mounting Hardware
• Direct Drive to operate when sun is out
• Blend Option will use sun & grid power
• Variable Frequency Drive provides soft start function to maximize daily run time
• Sizing based on geographic location, run time required, and Kasco product being operated
• Output of 120 or 240V single phase, or 230V 3 phase
• Will run up to a 1HP on single phase and 2HP on 3-phase

PicoCell Panel Details

• MPPT Operating Range of 100-380V
• Max PV Panel open circuit voltage of 400V
• Min operating PV voltage of 100V
• Maximum PV Panel current 9 amps
• Single phase max AC motor power of 13 amps
• 3 phase max AC motor power of 10.5 amps
• NEMA4/IP66 aluminum enclosure
• Operating Temp of -40°F to 122°F
• FCI motor protection is included

Ground Mount Racking

• 5-40O tilt angles
• Slide in connections for easy installation
• Galvanized steel construction
• Concrete foundation required
• 125mph wind rating
• Up to 80 PSF snow load

PicoBlender Panel Details

• Blends solar PV & electric grid power
• Maintains full power 24/7
• AC input voltage range of 120-240Vac single phase
• AC max input current 12 amp
• Single phase max AC motor power of 10 amps
• Three phase max AC motor power of 8 amps
• Solar PV operating range of 100-400Vdc
• Maximum PV Panel current 9 amps
• NEMA3R/IP65 aluminum enclosure
• Operating Temp of -40°F to 122°F
• GFCI motor protection is included

PV Solar Panels

• Minimum 325+watt polycrystalline photovoltaic panels
• Dimensions: 77” x 39” x 1.6”
• Operating Temperature Range: -40°F – 185°F

Solar Only Option

Operate a unit at variable speed to maximize the energy from the sun. In partial sun light (morning and afternoon) the unit will run at reduced speed, as to not shut off completely, extending the daily run time.

Blender Controller Option

Combine the solar only controller capabilities with grid power to save energy costs and allow for full speed, 24/7 operation.

Kasco 2.3JF 2 HP Decorative Fountain

The Kasco 2.3JF Decorative Fountain comes with 5 different fountain patterns: Redwood, Spruce, Birch, Linden and Balsam. The fountain is an energy efficient 3-phase, only using a 1750 rpm motor, made from a heavy-duty stainless steel, and the fountain itself helps add oxygen and improves your pond or lake aeration. The fountain includes a protected C-3235 control box..

It has an environmentally friendly design with a hard-face internal mechanical seal for protection against leaks. It also has a long-life top and bottom ball bearings. It is flood oil lubricated for an excellent heat dissipation. It has a superior dependability in salt-water or other corrosive environments such as chlorine. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode..

Protect your J Series Fountain power cord by adding a flex sleeve cord protector. Made of high strength, abrasion and cut resistant polyethylene, these cord protectors will keep your power cords safe from threats like wildlife, fish hooks and weed whippers.

Kasco 2.3JF 2 HP Decorative Fountain Features

• Six nozzles included with patterns ranging from 8-22’H x 4-46’W (2.5-7M x 1.5-15M) can operate in water as shallow as 20” (.5M)
• SHigh efficiency design means low power consumption and low operating costs (11 running amps on 60 Hz single phase 240V circuits, 7.5 running amps on 60 Hz three phase 240V circuits, 9.5 running amps on 50 Hz 220V single phase circuits, 3.3 amps on 50 Hz 380V three phase circuits)
• SUnique Kasco water-deflecting nozzle design delivers industry best clog-resistance
• SHeavy-duty motor and corrosion resistant design; suitable for salt-water or other corrosive environments
• SSafety Tested: ETL listed to UL and CSA standards, 50Hz models CE marked
• SLow maintenance and dependable design
• SMultiple options for power cord length (see charts below); all SJTOW underwater rated
• SThree 50 ft. (15M) braided nylon mooring ropes included