Skip to content
Learning Center About Us Contact Us
Outdoor Water Solutions Font`N-Aire Platinum 2HP Carnival Nozzle Single Phase

Outdoor Water Solutions Font`N-Aire Platinum 2HP Carnival Nozzle Single Phase

by Outdoor Water Solutions
$6,120.00

Notify me when back in stock

Font`N-Aire Platinum 2HP Carnival Nozzle Single Phase

On the flip side, let's delve into the ELECTRICAL SERVICE CABLE ASSEMBLY — a powerhouse in its own right. Imagine a standard 100 feet of AWG# 12/4 submersible cable, a robust lifeline for your aquatic marvels. Paired with a submersible quick disconnect connector, this assembly seamlessly plugs into your fountain, guaranteeing a steadfast electrical connection.

Now, let's venture into the realm of CONTROL, where innovation takes center stage. Picture a dazzling array of features: a 24-hour time clock, off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. These components, meticulously prewired, stand as a testament to thoughtful design, elegantly mounted on a 16” x 14” plate. Notably, Air-O-Lator's allegiance to excellence is embodied in the Franklin Electric 600M submersible motor, exclusively chosen for all fountain lines. Tailored for lake and pond fountain applications, this motor embodies precision with its water cooling and lubrication features, prioritizing environmental safety as a fundamental aspect.

Now, let's unveil the technological marvel that is the CENTRIFUGAL PUMP DISPLAY FOUNTAIN. Its hallmark is the distinctive center discharge pump design, ensuring the submersible motor's shaft and discharge maintain a steadfast vertical position. This ingenious design choice concentrates the entire fountain's weight at the float's center, easing installation and removal processes. No need for cumbersome mounting brackets or hardware — simplicity meets sophistication in design, making it a breeze to immerse yourself in the aquatic spectacle.

Details
  • FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with nonhygroscopic pressure molded polystyrene foam.
  • POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), propeller (Carnival Nozzle), and single phase motor.
  • ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain.
  • CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate.
    • More information

    Furthermore, our centrifugal pump design stands out by effortlessly generating high pressure. This remarkable capability allows for the crafting of awe-inspiring heights and displays, all achieved with notably lower horsepower demands in comparison to alternative fountain equipment. It's crucial to emphasize that this fountain is meticulously designed with aesthetic aspirations in mind. While it captivates with its visually striking water displays, it's essential to recognize that the volume of water propelled into the air doesn't meet the criteria for being deemed an aerating device. Rigorous oxygen transfer testing and adherence to Air-O-Lator's exacting standards underscore its exclusive focus on providing a visual spectacle that elevates any aquatic setting.

    Features
  • No seals or bearings to maintain.
  • High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water.
  • One piece square flotation for stability to minimize any oscillation that can occur with round floats.
  • Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments.
  • ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only).
  • Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system.
  • 3 year Limited Warranty
  • 2HP – 8' Tall x 25' Width

    • LEAVE A MESSAGE

    Font`N-Aire Platinum 2HP Carnival Nozzle Single Phase

    On the flip side, let's delve into the ELECTRICAL SERVICE CABLE ASSEMBLY — a powerhouse in its own right. Imagine a standard 100 feet of AWG# 12/4 submersible cable, a robust lifeline for your aquatic marvels. Paired with a submersible quick disconnect connector, this assembly seamlessly plugs into your fountain, guaranteeing a steadfast electrical connection.

    Now, let's venture into the realm of CONTROL, where innovation takes center stage. Picture a dazzling array of features: a 24-hour time clock, off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. These components, meticulously prewired, stand as a testament to thoughtful design, elegantly mounted on a 16” x 14” plate. Notably, Air-O-Lator's allegiance to excellence is embodied in the Franklin Electric 600M submersible motor, exclusively chosen for all fountain lines. Tailored for lake and pond fountain applications, this motor embodies precision with its water cooling and lubrication features, prioritizing environmental safety as a fundamental aspect.

    Now, let's unveil the technological marvel that is the CENTRIFUGAL PUMP DISPLAY FOUNTAIN. Its hallmark is the distinctive center discharge pump design, ensuring the submersible motor's shaft and discharge maintain a steadfast vertical position. This ingenious design choice concentrates the entire fountain's weight at the float's center, easing installation and removal processes. No need for cumbersome mounting brackets or hardware — simplicity meets sophistication in design, making it a breeze to immerse yourself in the aquatic spectacle.

    Details
  • FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with nonhygroscopic pressure molded polystyrene foam.
  • POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), propeller (Carnival Nozzle), and single phase motor.
  • ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain.
  • CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate.
    • More information

    Furthermore, our centrifugal pump design stands out by effortlessly generating high pressure. This remarkable capability allows for the crafting of awe-inspiring heights and displays, all achieved with notably lower horsepower demands in comparison to alternative fountain equipment. It's crucial to emphasize that this fountain is meticulously designed with aesthetic aspirations in mind. While it captivates with its visually striking water displays, it's essential to recognize that the volume of water propelled into the air doesn't meet the criteria for being deemed an aerating device. Rigorous oxygen transfer testing and adherence to Air-O-Lator's exacting standards underscore its exclusive focus on providing a visual spectacle that elevates any aquatic setting.

    Features
  • No seals or bearings to maintain.
  • High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water.
  • One piece square flotation for stability to minimize any oscillation that can occur with round floats.
  • Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments.
  • ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only).
  • Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system.
  • 3 year Limited Warranty
  • 2HP – 8' Tall x 25' Width

    • LEAVE A MESSAGE