Skip to content

Font`N-Aire Platinum 3HP 3 Phase Floating Fountains

$7,520.00

Notify me when back in stock

Font`N-Aire Platinum 3HP Single Phase Floating Fountains

An aquatic marvel featuring our innovative PROPELLER PUMP AERATING technology! With a scientifically engineered foul-resistant propeller, this fountain propels a spectacular column of water into the air through the specially designed "Carnival" nozzle. Witness the magic as the column transforms into millions of micro droplets, exposing water to the atmosphere for optimal aeration. As the aerated water returns, it creates a 360-degree turbulence radius, enhancing the air-water interface and promoting the transfer of atmospheric oxygen. Elevate your aquatic experience with the FontN-Aire Platinum – where cutting-edge technology meets enchanting beauty!

Major Components
  • FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam.
  • POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor.
  • ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (minimum) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain.
  • CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate. Air-O-Lator exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. The water cooled and lubricated motor is specifically designed for lake and pond fountain applications and is environmentally safe.
  • Features
  • No seals or bearings to maintain.
  • High-speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water.
  • One-piece square flotation for stability to minimize any oscillation that can occur with round floats.
  • Watertight, removable, 100’ power cable minimum. Additional cable lengths are available in 50’ increments.
  • ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only).
  • Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system.
  • 3 year Limited Warranty
  • LEAVE A MESSAGE

    Font`N-Aire Platinum 3HP Single Phase Floating Fountains

    An aquatic marvel featuring our innovative PROPELLER PUMP AERATING technology! With a scientifically engineered foul-resistant propeller, this fountain propels a spectacular column of water into the air through the specially designed "Carnival" nozzle. Witness the magic as the column transforms into millions of micro droplets, exposing water to the atmosphere for optimal aeration. As the aerated water returns, it creates a 360-degree turbulence radius, enhancing the air-water interface and promoting the transfer of atmospheric oxygen. Elevate your aquatic experience with the FontN-Aire Platinum – where cutting-edge technology meets enchanting beauty!

    Major Components
  • FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam.
  • POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor.
  • ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (minimum) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain.
  • CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate. Air-O-Lator exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. The water cooled and lubricated motor is specifically designed for lake and pond fountain applications and is environmentally safe.
  • Features
  • No seals or bearings to maintain.
  • High-speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water.
  • One-piece square flotation for stability to minimize any oscillation that can occur with round floats.
  • Watertight, removable, 100’ power cable minimum. Additional cable lengths are available in 50’ increments.
  • ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only).
  • Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system.
  • 3 year Limited Warranty
  • LEAVE A MESSAGE