Kasco High Efficiency Surface Aerator 2.3AF 2 HP 8 Solar Panels with Grid Blender Option
Capitalize on the unbeatable strength of Kasco products driven by the sun. This technology is easy to use and more powerful than anything on the market and is designed for use in applications spanning from farm ponds to harsh industrial environments. These patented controllers come solar + grid blender options. They are an all-in-one inverter and Variable Frequency Drive with maximum power point tracking designed to utilize the most solar power available.
Solar only systems use solar energy to maximize operation during daylight hours. In partial sunlight (morning and afternoon), the system will run at reduced speed extending the daily run time.
These packages includes
PicoCell™ 3500 Control Panel.
Blender Controller Option
These systems utilize solar power during the day and grid power at night to provide 24/7 performance. These packages include the PicoBlender™ 2500 Control Panel.
(morning and afternoon), the system will run at reduced speed extending the daily run time.
Product Features
Operate standard Kasco 50hz / 60hz, 1/2-2HP units (2HP units must be 3 phase)
Soft start function to maximize runtime and extended available solar hours
Status LEDs to indicate operating status and fault conditions
Easily add additional solar panels to increase performance and extend daily run time from solar
GFCI motor protection
Comes with 6 solar panels
Complete Package Includes
PicoPanel Controller - Grid Blended (PicoBlender) or Direct Drive (PicoCell)
Solar Panel Racking - Includes poles and crossbeams
Solar Panels
Solar Panel Jumper Cables
Kasco Aerator/Fountain/Circulator
All Mounting Hardware
Direct Drive to operate when sun is out
Blend Option will use sun & grid power
Variable Frequency Drive provides soft start function to maximize daily run time
Sizing based on geographic location, run time required, and Kasco product being operated
Output of 120 or 240V single phase, or 230V 3 phase
Will run up to a 1HP on single phase and 2HP on 3-phase
PicoCell Panel Details
MPPT Operating Range of 100-380V
Max PV Panel open circuit voltage of 400V
Min operating PV voltage of 100V
Maximum PV Panel current 9 amps
Single phase max AC motor power of 13 amps
3 phase max AC motor power of 10.5 amps
NEMA4/IP66 aluminum enclosure
Operating Temp of -40°F to 122°F
FCI motor protection is included
Ground Mount Racking
5-40O tilt angles
Slide in connections for easy installation
Galvanized steel construction
Concrete foundation required
125mph wind rating
Up to 80 PSF snow load
PicoBlender Panel Details
Blends solar PV & electric grid power
Maintains full power 24/7
AC input voltage range of 120-240Vac single phase
AC max input current 12 amp
Single phase max AC motor power of 10 amps
Three phase max AC motor power of 8 amps
Solar PV operating range of 100-400Vdc
Maximum PV Panel current 9 amps
NEMA3R/IP65 aluminum enclosure
Operating Temp of -40°F to 122°F
GFCI motor protection is included
PV Solar Panels
Minimum 325+watt polycrystalline photovoltaic panels
Dimensions: 77” x 39” x 1.6”
Operating Temperature Range: -40°F – 185°F
Solar Only Option
Operate a unit at variable speed to maximize the energy from the sun. In partial sun light (morning and afternoon) the unit will run at reduced speed, as to not shut off completely, extending the daily run time.
Blender Controller Option
Combine the solar only controller capabilities with grid power to save energy costs and allow for full speed, 24/7 operation.
Kasco Surface Aerator 2.3AF Features
High-efficiency design means low power compensation and low operating costs<
Heavy-duty motor and corrosion resistant design; suitable for salt-water or other corrosive environments
Safety Tested: ETL listed to UL and CSA Standards, 50Hz models CE marked
An easily replaced protective sacrificial zinc anode included with each unit
Low maintenance and dependable design
Multiple cord lengths available (see charts below); all SJTOW underwater rated (50 Hz models are available only with 10M or stub power cords)
Kasco Surface Aerator 2.3AF
The high-performance design of these aerators uses a single open propeller to create and push water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. These units can operate in as little as 20 inches (.6M) of water. 2.3AF Surface Aerators are ideal for ponds/tanks with surface areas of about 2 acres.
2.3AF units are available in 240 (60Hz) configuration. All units come with a float and three 50 ft. (15m) mooring lines. Optional bottom screens and/or control panels are also available.
